After recently purchasing the Falcon 030, I had a terrible problem trying to obtain the adapters (C303109-001) to hook up a VGA (15 pin) monitor. I managed to get a diagram and spoke to Atari who helped by informing me of an undocumented requirement. I know that Atari shipped the adapters recently so there should be no problem now, for those who can't wait or prefer to DIY, I have included the Maplin part numbers. Falcon 030 connection to VGA monitor (15 pin) First!!! Diagram of pin connections in Falcon manual are marked INCORRECTLY It should read: ---------------------------------- \ 10 9 8 7 6 5 4 3 2 1 / \ / \ 19 18 17 16 15 14 13 12 11 / -------------------------- Pin connections as follows: Falcon Monitor to VGA (15 Pin) 1 Red 1 Red 2 Green 2 Green 3 Blue 3 Blue 5 GND 5 Control Bit 6 Red Gnd 6 Red Gnd 7 Green Gnd 7 Green Grd 8 Blue Gnd 8 Blue Gnd 10 GND 10 GND l ---11 GND 11 GND i | 13 H-Sync 13 H-Sync n | 14 V-Sync 14 V-Sync k ---19 MO (connect to Gnd) Parts Required (Maplin) 15W D Skt Shell JW82D .98p 15W D Skt Hood FP28F .68p Skt Pin JW84 (qty 2) .56p 19 Pin D skt JZ18U .98p D hood 19W JZ24 .75p Cable 12way XS20W .92p 1 Metre Total Cost 4.87 Larry Green @ Compuserve 70374,1255 @ STF BBS Laz Green  |-THiS FiLE PASSED THR0UGH --- /\ ---.------ /\ ---*--.- FiDONET 2:200/612 --| | . * . // \ . // \ . FUJiNeT 7:102/102 | | I.C.S Swedish HQ // \ + // \ . MeGANeT 66:666/1 | | + // / \ // \ + NeST 90:1101/112 | | Sync World HQ /\\ \\ / . // \\ / | | . // \ \/ // /\/ . 16800 DUAL STANDARD | | +46-451-91002 \\ / / \\ \/ + | | * \\ / + . \\ \ . . . | | . \\ / \\ / | |- SysOp: Troed ------------ \/ARCASTIC -- \/XISTENCE --- CoSysOp: Zaphod B -| < Advertisment added using -=Bad Ad=- 1.92 by Troed/Sync. BBS: +46-451-91002 >