Extreme Networks Summit 48 I bought an "Extreme Networks Summit 48" 48 port ethernet switch, with ExtremeWare OS" #---------#---------#---------#---------#---------#---------#---------#-- description "Extreme Networks Summit 48" 48 port ethernet switch, with ExtremeWare OS http://www.extremenetworks.com/services/documentation/PreventativeGuide.asp http://www.extremenetworks.com/services/documentation/svcinstall.pdf 1 term emulation 2 press Return . login prompt appears 3 login default u: admin p:(none) 4 exit * Summit48:4 # logout #---------#---------#---------#---------#---------#---------#---------#-- console access see Summit Switch Installation and User Guide F:\docs-product\extreme-summit\ExtremeSummitUserGuide.pdf p2-4 baud rate 9600 data bits 8 stop bit 1 parity none flow control xon/xoff null modem from my laptop com1 to switch rear hyperterm settings: 9600 8-N-1 saved as TESTING from ifw01 IRq was set as 4 in BIOS but linux gave it 14. 14 not working, lots of input/output errors setserial /dev/ttyS0 irq 4 sorted it setserial see http://www.ibiblio.org/pub/Linux/docs/HOWTO/other-formats/html_single/Serial-HOWTO.html tested with two terms, one doing cat /dev/ttyS0 one doing echo "\n" > /dev/ttyS0 fist term scrolled login nonstop minicom ifw01:~# minicom minicom-test worked after * I figured out where /etc/minicom/minicom.dfl was the default config file and stopped it looking at /dev/ttyS1 * irq was changed from 14 to 4 (see above) http://netwinder.osuosl.org/users/u/urnaik/public_html/ixp1200_howto.html#UsingMinicom * Type CTRL A O to get a minicom configuration menu. * Choose serial port setup and set up for 9600 8N1 and no flow control. * Then in the menu choose save setup as and save it as ixp1200. * Exit minicom with CTRL A X * Start minicom with minicom ixp1200 to select the previously saved configuration. * Reboot the IXP1200. At this point you should be able to talk to the ixp1200. #---------#---------#---------#---------#---------#---------#---------#-- reset config to factory default what was the trick here? Spacebar and power on? BootROM-> BootROM-> BootROM-> 1: Select primary image 2: Select secondary image d: Force default configuration s: Load from Serial Port to RAM p: Boot PCMCIA card f: Boot FLASH image b: Change baud rate h: Help g: Boot RAM image BootROM-> BootROM-> BootROM-> Boot Module v1.9 ===================================== Memory Size: 02000000 Press spacebar for boot menu Uncompressing primary image from flash.......................................... ................................................................................ ................................................................................ ............................................................................... ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ExtremeWare Copyright (C) 1999 by Extreme Networks =============================================== Version 4.1.19 (Build 2) By Release_Master on Wed 08/09/2000 6:09p System Serial Number: 0048M06022 Memory Size: 33554432 (32MB) MAC Address: 00:01:30:d4:18:00 ASIC register and memory test ..........passed Start running diagnostic test .................................................. ................................................................................ ..........................................................................passed Copyright (C) 1999 by Extreme Networks login: admin password: Press the key at any time for completions. Don't forget to save your configuration changes. * Summit48:1 # unconfig switch all Restore all factory defaults and reboot? (yes/no) yes Rebooting... #---------#---------#---------#---------#---------#---------#---------#-- http://cgi.ebay.com/Extreme-Networks-15000-Summit-48-Port-Switch-w-2x-GigE_W0QQitemZ190076455410QQcmdZViewItem Boot Module v1.9 ===================================== Memory Size: 02000000 Press spacebar for boot menu Uncompressing primary image from flash.......................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................... [ [2J [0m ExtremeWare Copyright (C) 1999 by Extreme Networks =============================================== Version 4.1.19 (Build 2) By Release_Master on Wed 08/09/2000 6:09p System Serial Number: 0103F41339 Memory Size: 33554432 (32MB) MAC Address: 00:01:30:0d:00:50 ASIC register and memory test ..........passed Copyright (C) 1999 by Extreme Networks login: admin password: Press the key at any time for completions. Dont forget to save your configuration changes. Summit48:1 # sh switch sysName: Summit48 sysLocation: sysContact: support@extremenetworks.com, +1 888 257 3000 System MAC: 00:01:30:0d:00:50 License: Basic L3. Qos Mode: Ingress System Mode: 802.1Q EtherType is 8100. PACE disabled. Jumbo disabled. Current time: Wed Sep 13 12:14:55 2006 Timezone: GMT Offset: 0 minutes, DST is in effect. Auto DST check: Enabled Boot time: Wed Sep 13 12:14:45 2006 Next reboot: None scheduled Timed upload: None scheduled Temperature: 23C. All fans are operational. Power supply: Primary OK, RPS not present Software image selected: primary Software image booted: primary Primary software version: 4.1.19b2 Secondary software version: 4.1.19b2 Configuration selected: primary Configuration booted: primary Primary configuration: 444520 bytes saved on Wed Sep 13 10:51:15 2006 Secondary configuration: Empty Summit48:2 # sh ports Syntax error at end of line. Next possible completions: collisions configuration info packet qosmonitor rxerrors stats txerrors utilization Summit48:3 # sh port info Information for port 1: Port state: enabled Link state: ready Port diagnostic: pass Configured Duplex mode: auto Configured speed: auto Link up 0 time(s) Link down 1 time(s) Media type: UTP Has redundant port: no Summit Link disabled Extreme Discovery Protocol: enabled Qos Monitor: disabled Load sharing is not enabled MAC Learning: enabled VLAN information: Default(untagged) Vlan Id: 1 Protocol: Vlan Default Priority: 0 type: EtherType value: ffff Qos Profile: None configured Queue to Qos Profile Mapping: Q0: QP1 MinBw 0, MaxBw 100, Pri Low Q1: QP2 MinBw 0, MaxBw 100, Pri Normal Q2: QP3 MinBw 0, MaxBw 100, Pri Medium Q3: QP4 MinBw 0, MaxBw 100, Pri High [7mPress to continue or to quit: [0m [2K Information for port 2: Port state: enabled Link state: ready Port diagnostic: pass Configured Duplex mode: auto Configured speed: auto Link up 0 time(s) Link down 1 time(s) Media type: UTP Has redundant port: no Summit Link disabled Extreme Discovery Protocol: enabled Qos Monitor: disabled Load sharing is not enabled MAC Learning: enabled VLAN information: Default(untagged) Vlan Id: 1 Protocol: Vlan Default Priority: 0 type: EtherType value: ffff Qos Profile: None configured Queue to Qos Profile Mapping: Q0: QP1 MinBw 0, MaxBw 100, Pri Low Q1: QP2 MinBw 0, MaxBw 100, Pri Normal Q2: QP3 MinBw 0, MaxBw 100, Pri Medium Q3: QP4 MinBw 0, MaxBw 100, Pri High [7mPress to continue or to quit: [0m [2K Summit48:4 # sh port info Information for port 1: Port state: enabled Link state: ready Port diagnostic: pass Configured Duplex mode: auto Configured speed: auto Link up 0 time(s) Link down 1 time(s) Media type: UTP Has redundant port: no Summit Link disabled Extreme Discovery Protocol: enabled Qos Monitor: disabled Load sharing is not enabled MAC Learning: enabled VLAN information: Default(untagged) Vlan Id: 1 Protocol: Vlan Default Priority: 0 type: EtherType value: ffff Qos Profile: None configured Queue to Qos Profile Mapping: Q0: QP1 MinBw 0, MaxBw 100, Pri Low Q1: QP2 MinBw 0, MaxBw 100, Pri Normal Q2: QP3 MinBw 0, MaxBw 100, Pri Medium Q3: QP4 MinBw 0, MaxBw 100, Pri High [7mPress to continue or to quit: [0m [2K Summit48:5 # sh port config [2J [01;01HPort Configuration Monitor [04;01H================================================================================ [02;01HPort Port Link Auto Speed Duplex Flow Ld Share Media [03;01H State Status Neg Cfg Actual Cfg Actual Ctrl Master Pri Red [23;01H================================================================================ [24;22HU->page up D->page down ESC->exit [01;55HWed Sep 13 12:15:13 2006 [5;01H 1 ENABLED READY ON AUTO AUTO UTP [6;01H 2 ENABLED READY ON AUTO AUTO UTP [7;01H 3 ENABLED READY ON AUTO AUTO UTP [8;01H 4 ENABLED READY ON AUTO AUTO UTP [9;01H 5 ENABLED READY ON AUTO AUTO UTP [10;01H 6 ENABLED READY ON AUTO AUTO UTP [11;01H 7 ENABLED READY ON AUTO AUTO UTP [12;01H 8 ENABLED READY ON AUTO AUTO UTP [13;01H 9 ENABLED READY ON AUTO AUTO UTP [14;01H 10 ENABLED READY ON AUTO AUTO UTP [15;01H 11 ENABLED READY ON AUTO AUTO UTP [16;01H 12 ENABLED READY ON AUTO AUTO UTP [17;01H 13 ENABLED READY ON AUTO AUTO UTP [18;01H 14 ENABLED READY ON AUTO AUTO UTP [19;01H 15 ENABLED READY ON AUTO AUTO UTP [20;01H 16 ENABLED READY ON AUTO AUTO UTP [21;01H 17 ENABLED READY ON AUTO AUTO UTP [22;01H 18 ENABLED READY ON AUTO AUTO UTP [01;55HWed Sep 13 12:15:15 2006 [5;01H 1 ENABLED READY ON AUTO AUTO UTP [6;01H 2 ENABLED READY ON AUTO AUTO UTP [7;01H 3 ENABLED READY ON AUTO AUTO UTP [8;01H 4 ENABLED READY ON AUTO AUTO UTP [9;01H 5 ENABLED READY ON AUTO AUTO UTP [10;01H 6 ENABLED READY ON AUTO AUTO UTP [11;01H 7 ENABLED READY ON AUTO AUTO UTP [12;01H 8 ENABLED READY ON AUTO AUTO UTP [13;01H 9 ENABLED READY ON AUTO AUTO UTP [14;01H 10 ENABLED READY ON AUTO AUTO UTP [15;01H 11 ENABLED READY ON AUTO AUTO UTP [16;01H 12 ENABLED READY ON AUTO AUTO UTP [17;01H 13 ENABLED READY ON AUTO AUTO UTP [18;01H 14 ENABLED READY ON AUTO AUTO UTP [19;01H 15 ENABLED READY ON AUTO AUTO UTP [20;01H 16 ENABLED READY ON AUTO AUTO UTP [21;01H 17 ENABLED READY ON AUTO AUTO UTP [22;01H 18 ENABLED READY ON AUTO AUTO UTP [2J [01;01HPort Configuration Monitor [04;01H================================================================================ [02;01HPort Port Link Auto Speed Duplex Flow Ld Share Media [03;01H State Status Neg Cfg Actual Cfg Actual Ctrl Master Pri Red [23;01H================================================================================ [24;22HU->page up D->page down ESC->exit [01;55HWed Sep 13 12:15:17 2006 [5;01H 19 ENABLED READY ON AUTO AUTO UTP [6;01H 20 ENABLED READY ON AUTO AUTO UTP [7;01H 21 ENABLED READY ON AUTO AUTO UTP [8;01H 22 ENABLED READY ON AUTO AUTO UTP [9;01H 23 ENABLED READY ON AUTO AUTO UTP [10;01H 24 ENABLED READY ON AUTO AUTO UTP [11;01H 25 ENABLED READY ON AUTO AUTO UTP [12;01H 26 ENABLED READY ON AUTO AUTO UTP [13;01H 27 ENABLED READY ON AUTO AUTO UTP [14;01H 28 ENABLED READY ON AUTO AUTO UTP [15;01H 29 ENABLED READY ON AUTO AUTO UTP [16;01H 30 ENABLED READY ON AUTO AUTO UTP [17;01H 31 ENABLED READY ON AUTO AUTO UTP [18;01H 32 ENABLED READY ON AUTO AUTO UTP [19;01H 33 ENABLED READY ON AUTO AUTO UTP [20;01H 34 ENABLED READY ON AUTO AUTO UTP [21;01H 35 ENABLED READY ON AUTO AUTO UTP [22;01H 36 ENABLED READY ON AUTO AUTO UTP [2J [01;01HPort Configuration Monitor [04;01H================================================================================ [02;01HPort Port Link Auto Speed Duplex Flow Ld Share Media [03;01H State Status Neg Cfg Actual Cfg Actual Ctrl Master Pri Red [23;01H================================================================================ [24;22HU->page up D->page down ESC->exit [01;55HWed Sep 13 12:15:19 2006 [5;01H 37 ENABLED READY ON AUTO AUTO UTP [6;01H 38 ENABLED READY ON AUTO AUTO UTP [7;01H 39 ENABLED READY ON AUTO AUTO UTP [8;01H 40 ENABLED READY ON AUTO AUTO UTP [9;01H 41 ENABLED READY ON AUTO AUTO UTP [10;01H 42 ENABLED READY ON AUTO AUTO UTP [11;01H 43 ENABLED READY ON AUTO AUTO UTP [12;01H 44 ENABLED READY ON AUTO AUTO UTP [13;01H 45 ENABLED READY ON AUTO AUTO UTP [14;01H 46 ENABLED READY ON AUTO AUTO UTP [15;01H 47 ENABLED READY ON AUTO AUTO UTP [16;01H 48 ENABLED READY ON AUTO AUTO UTP [17;01H 49 ENABLED READY ON 1000 AUTO [18;01H 50 ENABLED READY ON 1000 AUTO [01;55HWed Sep 13 12:15:21 2006 [5;01H 37 ENABLED READY ON AUTO AUTO UTP [6;01H 38 ENABLED READY ON AUTO AUTO UTP [7;01H 39 ENABLED READY ON AUTO AUTO UTP [8;01H 40 ENABLED READY ON AUTO AUTO UTP [9;01H 41 ENABLED READY ON AUTO AUTO UTP [10;01H 42 ENABLED READY ON AUTO AUTO UTP [11;01H 43 ENABLED READY ON AUTO AUTO UTP [12;01H 44 ENABLED READY ON AUTO AUTO UTP [13;01H 45 ENABLED READY ON AUTO AUTO UTP [14;01H 46 ENABLED READY ON AUTO AUTO UTP [15;01H 47 ENABLED READY ON AUTO AUTO UTP [16;01H 48 ENABLED READY ON AUTO AUTO UTP [17;01H 49 ENABLED READY ON 1000 AUTO [18;01H 50 ENABLED READY ON 1000 AUTO [01;55HWed Sep 13 12:15:23 2006 [5;01H 37 ENABLED READY ON AUTO AUTO UTP [6;01H 38 ENABLED READY ON AUTO AUTO UTP [7;01H 39 ENABLED READY ON AUTO AUTO UTP [8;01H 40 ENABLED READY ON AUTO AUTO UTP [9;01H 41 ENABLED READY ON AUTO AUTO UTP [10;01H 42 ENABLED READY ON AUTO AUTO UTP [11;01H 43 ENABLED READY ON AUTO AUTO UTP [12;01H 44 ENABLED READY ON AUTO AUTO UTP [13;01H 45 ENABLED READY ON AUTO AUTO UTP [14;01H 46 ENABLED READY ON AUTO AUTO UTP [15;01H 47 ENABLED READY ON AUTO AUTO UTP [16;01H 48 ENABLED READY ON AUTO AUTO UTP [17;01H 49 ENABLED READY ON 1000 AUTO [18;01H 50 ENABLED READY ON 1000 AUTO [2J Summit48:6 # #---------#---------#---------#---------#---------#---------#---------#-- config * Summit48:3 # show configuration # Configuration generated Sat May 19 15:33:45 2007 # Software Version 4.1.19 (Build 2) By Release_Master on Wed 08/09/2000 6:0 9p # System Name "Summit48" Press to continue or to quit: configure qosmode ingress Press to continue or to quit: disable pace configure dot1q ethertype 8100 # disable jumbo config qosprofile QP1 minbw 0% maxbw 100% priority Low config qosprofile QP2 minbw 0% maxbw 100% priority Normal config qosprofile QP3 minbw 0% maxbw 100% priority Medium config qosprofile QP4 minbw 0% maxbw 100% priority High delete prot delete protocol ipx delete protocol netbios delete protocol decnet delete protocol appletalk delete protocol ipx_8022 delete protocol ipx_snap create protocol ipx_snap create protocol ipx_8022 create protocol appletalk create protocol decnet create protocol netbios create protocol ipx create protocol IP configure vlan default delete ports all create vlan "Default" # # Config information for VLAN Default. config vlan "Default" tag 1 # VLAN-ID=0x1 Global Tag 1 config vlan "Default" protocol "ANY" config vlan "Default" qosprofile "QP1" enable bootp vlan "Default" configure vlan "Default" add port 1 untagged configure vlan "Default" add port 2 untagged configure vlan "Default" add port 3 untagged configure vlan "Default" add port 4 untagged configure vlan "Default" add port 5 untagged configure vlan "Default" add port 6 untagged configure vlan "Default" add port 7 untagged configure vlan "Default" add port 8 untagged configure vlan "Default" add port 9 untagged configure vlan "Default" add port 10 untagged configure vlan "Default" add port 11 untagged configure vlan "Default" add port 12 untagged configure vlan "Default" add port 13 untagged configure vlan "Default" add port 14 untagged configure vlan "Default" add port 15 untagged configure vlan "Default" add port 16 untagged configure vlan "Default" add port 17 untagged configure vlan "Default" add port 18 untagged configure vlan "Default" add port 19 untagged configure vlan "Default" add port 20 untagged configure vlan "Default" add port 21 untagged configure vlan "Default" add port 22 untagged configure vlan "Default" add port 23 untagged configure vlan "Default" add port 24 untagged configure vlan "Default" add port 25 untagged configure vlan "Default" add port 26 untagged configure vlan "Default" add port 27 untagged Press to continue or to quit: configure vlan "Default" add port 28 untagged configure vlan "Default" add port 29 untagged configure vlan "Default" add port 30 untagged configure vlan "Default" add port 31 untagged configure vlan "Default" add port 32 untagged configure vlan "Default" add port 33 untagged configure vlan "Default" add port 34 untagged configure vlan "Default" add port 35 untagged configure vlan "Default" add port 36 untagged configure vlan "Default" add port 37 untagged configure vlan "Default" add port 38 untagged configure vlan "Default" add port 39 untagged configure vlan "Default" add port 40 untagged configure vlan "Default" add port 41 untagged configure vlan "Default" add port 42 untagged configure vlan "Default" add port 43 untagged configure vlan "Default" add port 44 untagged configure vlan "Default" add port 45 untagged configure vlan "Default" add port 46 untagged configure vlan "Default" add port 47 untagged configure vlan "Default" add port 48 untagged configure vlan "Default" add port 49 untagged configure vlan "Default" add port 50 untagged # Boot information use image primary use configuration primary # syslog configuration configure log display info disable log display Press to continue or to quit: configure syslog 0.0.0.0 local0 info disable syslog delete account user configure account admin encrypted 452fYk$jRXd.feFF3D4UOpChza6J1 452fYk$jRXd.feFF3D4UOpChza6J1 create account user "user" encrypted "yN/fYk$mALofZJYMrYa8Q3OEv/Hs/" enable telnet configure banner enable web enable snmp access enable snmp trap configure snmp community readwrite "private" configure snmp community readonly "public" configure snmp sysName "Summit48" configure snmp sysLocation "" configure snmp sysContact "support@extremenetworks.com, +1 888 257 3000" disable rmon disable idletimeouts enable clipaging enable cli-config-logging configure port 1 auto on enable edp port 1 configure port 2 auto on enable edp port 2 configure port 3 auto on enable edp port 3 configure port 4 auto on enable edp port 4 configure port 5 auto on enable edp port 5 configure port 6 auto on enable edp port 6 configure port 7 auto on enable edp port 7 configure port 8 auto on enable edp port 8 configure port 9 auto on enable edp port 9 configure port 10 auto on enable edp port 10 configure port 11 auto on enable edp port 11 configure port 12 auto on enable edp port 12 configure port 13 auto on enable edp port 13 configure port 14 auto on enable edp port 14 configure port 15 auto on enable edp port 15 configure port 16 auto on enable edp port 16 configure port 17 auto on enable edp port 17 configure port 18 auto on enable edp port 18 configure port 19 auto on enable edp port 19 configure port 20 auto on enable edp port 20 configure port 21 auto on enable edp port 21 configure port 22 auto on enable edp port 22 configure port 23 auto on enable edp port 23 configure port 24 auto on enable edp port 24 configure port 25 auto on enable edp port 25 configure port 26 auto on enable edp port 26 configure port 27 auto on enable edp port 27 configure port 28 auto on enable edp port 28 configure port 29 auto on enable edp port 29 configure port 30 auto on enable edp port 30 configure port 31 auto on enable edp port 31 configure port 32 auto on enable edp port 32 password: configure port 33 auto on login: admin enable edp port 33 Login fa configure port 34 auto onmin password: enable edp port 34iled L configure port 35 auto onts enable edp port 35in attempt configure port 36 auto on(C) 1999 by Extreme Netw enable edp port 36 configure port 37 auto on password: enable edp port 37 login: admi configure port 38 auto on Login failed enable edp port 38 login: log configure port 39 auto onword: Login fai enable edp port 39in failed after 3 configure port 40 auto on Invalid logi Press to continue or to quit: (C) 1999 by Extreme Networks enable edp port 40 login: a configure port 41 auto on Login failed enable edp port 41dmin p configure port 42 auto onailed login: enable edp port 42 Boot BootROM-> BootR configure protocol IP add etype 800 etype 806 BootROM-> BootROM-> B # Spanning tree information BootROM-> configure s0 add vlan Default BootROM-> Bo disable stpd s0 BootROM-> enable stpd s0 port 1 BootROM-> configure stpd s0 port cost 100 1 BootROM-> BootROM-> enable stpd s0 port 2 BootROM-> configure stpd s0 port cost 100 2 BootROM-> BootRO enable stpd s0 port 3 BootROM-> configure stpd s0 port cost 100 3-> BootROM-> Bo BootROM-> enable stpd s0 port 16tROM-> BootRO configure stpd s0 port cost 100 16tROM-> BootROM-> enable stpd s0 port 17tROM-> BootRO configure stpd s0 port cost 100 17tROM-> BootROM-> enable stpd s0 port 18tROM-> BootRO configure stpd s0 port cost 100 18tROM-> BootROM-> enable stpd s0 port 19tROM-> BootRO configure stpd s0 port cost 100 19tROM-> BootROM-> enable stpd s0 port 20tROM-> BootRO configure stpd s0 port cost 100 20tROM-> BootROM-> enable stpd s0 port 21tROM-> BootRO configure stpd s0 port cost 100 21tROM-> BootROM-> enable stpd s0 port 31tROM-> BootRO configure stpd s0 port cost 100 31tROM-> BootROM-> enable stpd s0 port 32tROM-> BootRO configure stpd s0 port cost 100 32tROM-> BootROM-> enable stpd s0 port 33tROM-> BootRO configure stpd s0 port cost 100 33tROM-> BootROM-> enable stpd s0 port 34tROM-> BootRO configure stpd s0 port cost 100 34tROM-> BootROM-> enable stpd s0 port 35tROM-> BootRO configure stpd s0 port cost 100 35tROM-> BootROM-> enable stpd s0 port 36tROM-> BootRO configure stpd s0 port cost 100 36tROM-> BootROM-> enable stpd s0 port 37tROM-> BootRO configure stpd s0 port cost 100 37tROM-> BootROM-> enable stpd s0 port 38tROM-> BootRO configure stpd s0 port cost 100 38tROM-> BootROM-> enable stpd s0 port 39tROM-> BootRO Press to continue or ttROM-> BootROM-> configure stpd s0 port cost 100 48 BootROM-> BootROM-> enable stpd s0 port 49 BootROM-> configure stpd s0 port cost 4 49 BootROM-> BootROM enable stpd s0 port 50 BootROM-> configure stpd s0 port cost 4 50 BootROM-> Boo # GVRP configurationM-> BootROM disable gvrpootROM-> config gvrp both ports 1BootROM-> BootR config gvrp both ports 2 BootROM-> config gvrp both ports 3tROM-> BootROM- config gvrp both ports 4 BootROM-> config gvrp both ports 5M-> BootROM-> config gvrp both ports 6 BootROM-> Boo config gvrp both ports 7 BootROM-> config gvrp both ports 8ootROM-> BootRO config gvrp both ports 9 BootROM-> config gvrp both ports 10OM-> BootROM-> config gvrp both ports 11 BootROM-> BootR config gvrp both ports 12 BootROM-> config gvrp both ports 13M-> BootROM-> config gvrp both ports 35-> BootROM-> config gvrp both ports 36ootROM-> BootROM config gvrp both ports 37 BootROM-> B config gvrp both ports 38> BootROM-> config gvrp both ports 39otROM-> BootROM- config gvrp both ports 40 BootROM-> Bo config gvrp both ports 41 BootROM-> config gvrp both ports 42tROM-> BootROM-> config gvrp both ports 43 BootROM-> Boo config gvrp both ports 44 BootROM-> config gvrp both ports 45ROM-> BootROM-> config gvrp both ports 46 BootROM-> Boot config gvrp both ports 47 BootROM-> config gvrp both ports 48OM-> BootROM-> config gvrp both ports 49 BootROM-> BootR Press to continue or to quit: BootROM-> BootROM-> BootROM-> disable multinet BootROM- disable bootprelay> BootROM # # IP ARP Configuration BootROM-> #B # IP Route Configuration-> BootROM-> # Multicast configurationBootROM-> BootRO config igmp 125 10 1> BootROM-> enable igmp snooping BootROM-> configure igmp snooping timer 260 260 BootROM-> BootROM-> disable ipmcforwarding DefaultROM-> BootROM-> Press to continue or to quit:BootROM-> BootROM-> Boo enable igmp DefaultROM-> Boot # RIP interface configuration BootROM-> BootRO config rip delete vlan Default BootROM-> BootROM-> config rip txmode v2only vlan Default BootROM-> BootROM-> config rip rxmode any vlan DefaultM-> BootROM-> Bo config rip vlan Default tr BootROM-> # config DVMRP timer 60 140=========== disable DVMRP Mem Press to continue or to quit:Press spacebar for boot menu config DVMRP vlan Default timer 10 35image from flash..................... #. # PIM Router Configuration Press to continue or to quit: ...................................... #. disable pim-dm.............. # Ospf Area Cfg create ospf area 0.0.0.0 config ospf area 0.0.0.0 interarea-filter None........................................... config ospf area 0.0.0.0 external-filter None ............. # Ospf Range Cfg................ Press to continue or to quit: # Interface cf disable ospf export static ..................... disable ospf export rip....................... # ESRP Interface Configuration enable ipxrip enable ipxsap configure ipxmaxhops 16 # IPX static routes # IPX static services # SNTP client configuration disable sntp-client configure sntp-client primary server "" configure sntp-client secondary server "" configure sntp-client update-interval 64 configure timezone 0 autodst disable radius unconfigure radius server primary unconfigure radius server secondary configure radius primary shared-secret "" configure radius secondary shared-secret "" # # End of configuration file for "Summit48". # * Summit48:4 # #---------#---------#---------#---------#---------#---------#---------#--