Windows NT device driver(s) for Intel and Alpha AXP systems.
      ===========================================================


Section 1:.............................Notes on Windows NT V3.5/3.51 drivers
Section 2:.............................Configuration utility for ALPHA systems
Section 3:.............................Interpreting event log entries.

  
  Note: If this driver was contained in a ZIPfile it should be noted that
        problems may occur if the file was unZIPped while under Windows 
        NT(DOS). If you experience problems running the driver it may be 
        necessary to BOOT DOS to unZIP the file.


                             Section 1
                             =========
      
   This kit contains Windows NT (V3.5/3.51) device drivers for Intel 
   and Alpha AXP systems.

     - Windows NT V3.5/3.51 (Intel and Alpha AXP) driver V2.07 in directory
       \WINNT
                o Now supports 2K MemoryMode

                o Now supports PIO mode (Programmed I/O)


                             Section 2
                             =========
 
   New setup utility (V1.17) for Windows NT on Alpha AXP systems has been
   included in the kit. \WINNT\NICAXP.EXE. This utility runs under the
   arc console. From the BOOT MENU select the RUN A PROGRAM option. At the
   prompt:

                Program to run: a:\winnt\nicaxp

   Once you are inside the menu configure your EtherWORKS 3 card according
   to your PC's Operating environment. When done SAVE your changes and 
   power off your PC for the changes to take effect.


                             Section 3
                             =========

INTERPRETING EVENT LOG ENTRIES:

If there are events in the error log which are written by the EtherWORKS 3
TURBO device driver, event information can be determined by examining the 
last longword of the entry.

Value   Problem
-----   -------
0       No useful information has been logged.
1       CRC fault on the adapter's EEPROM.  Possible hardware fault.
2       Shared memory size is illegal.  Use 32k or 64k.
3       Memory could not be allocated.  The system lacks sufficient memory.
4       Shared memory could not be mapped, probably a system conflict.
5       Filter Init failed.  Possible lack of sufficient system memory.